Ok I need more help guys....Vag-Com info posted

coppa · #1 04-04-2008, 03:45 AM

5.09
0
Enabled
4.8
3080
178.2
13.12
109.08

5.99
0
Enabled
5.69
3320
191.7
19.68
138.03

6.9
0
Enabled
6.59
3640
191.7
17.63
132.03

7.8
6
Disabled
7.49
3800
191.7
18.04
132.64

I did some logs with my Vag-Com and I came up with some info that I am not to sure about. In the FAQ on vortex it says that the maf reading should be about 170 g/s in WOT to redline. Mine is highlighted in BOLD. I tried a little run and as you can see I got up to 3800 rmps or about 21psi at that time and it started to studder and I got my "misfires" My question to those that have Vag-Com is if you can do a run, log measuring block 002 and let me know what your MAF sensor says in g/s. I would really appreciate it. Also if anyone has anything ideas it would be appreciated. Remember this all happened after I removed my cover of my VTDA. Am I sucking too much air for the MAF to handle? I only get misfires in cyl #4. I have changed the plug and moved the coil pack to cyl # 3 and still get misfires in cyl #4. Any help anyone....thanks!

EDIT: No Cel's lol....